LTE interface from R11e-LTE/R11e-LTE-US mini-pcie moduleĭata Channel=2, Info Channel=2, APN .nz, PHONE=*99#. And starting with v7.xx it will support LTE interface. Works! Using PPP interface, vendor-id="0x05c6" device-id="0x9000" If modem uses firmware 3.5 it should be upgraded to 3.5.23.2 firmware release in order to work in RouterOS correctly again.
Supports multiple APN passthrough.Ĭustomer tested the modem with firmware 03.05.23 Ppp/LTE interface, there is page in wiki about Quectel: article Also supported in RouterOS v7 with MBIM dirver. Ppp/LTE interface, there is page in wiki about Quectel ppp mode: articleĮCM driver. Ppp interface, there is page in wiki about Quectel: article No serial support, but works with IP on LTE interface. LTE interface with Ethernet emulation (no configuration possible), LTE supported bands 42/43 Recommended modem firmware version 11.617.24.00.00 To reduce LTE interface IP subnet mask to /32 configure modem with at-chat command: /interface lte at-chat input="AT^CUSTFEATURE=3,1" No serial support, but works with IP on LTE interface There are different versions of this modem E3531-6 works from version 6.40RC25 as ppp, mbim supported only from RouterOS V7 Models suffixes -320 and -608 will not work with RouterOS v6, please use v7 instead.
Works! ppp interface, vendorid=0x12d1 deviceid=0x140cĬonfig-less LTE interface for modems with vendor-id="0x12d1" device-id="0x14db" Works! Data Channel: 2, Info Channel: 3,Modem Init: AT+CFUN=1, vendor-id="0x2001" device-id="0x7d02" Some info from modem: > H/W Ver.: B1, F/W Ver.: 2.0.1eu, revision: +CGMR: .WG.MP.V3, 9 02:08 Different HW revisions might not work with RouterOSĭata channel 0, Info channel 0, init: AT+CFUN=1 (needs manualy change profile by command AT*ENAP=1,1) ( aka "USB Wireless HSDPA/UMTS 2.1GHz GSM/GPRS/EGPRS 900/17000MHz/CDMA 1x EVDO Rev.A") LTE interface, Modem can be configured only through modems configuration WEB page.
0 kommentar(er)
